Industrial applications such as factory floor are typically electrically noisy environments. Electrical noise either radiated or conducted as electromagnetic interference (EMI), can seriously disrupt the proper operation of other equipment. Shielding is needed to combat the effects of EMI. The shield can act on EMI on two ways. First it can reflect the energy. Second, it can pick up the noise and conduct it to ground. In either case, EMI does not reach the conductors.
- Control and signal cable in speacial purpose machines and measurement equipment Electronics and computer systems.
- Electronics scales/electronic weighing machines.
- Many data transmission applictions and instrumentation applications.
- These control and signal cables are used in the milliampere range for computer systems, electronic control equipment, office machines, scales etc.
- Drives & automation industry
- It is used for electronic weighing systems Unmatched durability, yet extremely flexible, Designed for use in hostile environments.
- For signal transmission in electronic instruments, sensors, encoders and actuators with operating voltage of less than 50V
Voltage Grade up to: 350 V, 500 V, 600 V
Capacitance (at a frequency of 1 kHz): C/C max. 200 pf/m & C/S max. 400 pf/m
Inductance: 1.25 mH/km (max.)
| RADIX’ Multicore Shielded Screen Taped Signal Controll Instrumentation & Computer Data cable for EMI protection | |||||||||||||
| Size in sq. mm. | Size in mm. | Approximate overall diameter of cable (mm) | |||||||||||
| 2 core | 3 core | 4 core | 5 core | 6 core | 7 core | 8 core | 10 core | 12 core | 14 core | 16 core | 19 core | ||
| 0.125 | 7/0.15 | 3.90 | 4.20 | 4.60 | 4.90 | 5.60 | 5.70 | 6.00 | 6.40 | 6.80 | 7.00 | 7.50 | 8.60 |
| 0.25 | 14/0.15 | 4.20 | 5.30 | 5.70 | 6.00 | 6.50 | 6.60 | 7.10 | 7.60 | 8.00 | 8.30 | 8.50 | 9.50 |
| 0.50 | 16/0.20 | 6.20 | 6.50 | 7.20 | 8.30 | 8.50 | 8.50 | 9.30 | 10.80 | 11.20 | 12.00 | 12.60 | 13.20 |
| 0.75 | 24/0.20 | 6.80 | 7.20 | 7.90 | 9.10 | 9.50 | 9.50 | 10.40 | 12.20 | 12.60 | 13.30 | 14.20 | 14.90 |
| 1.00 | 32/0.20 | 7.00 | 7.50 | 8.10 | 9.60 | 9.80 | 9.80 | 10.70 | 12.60 | 13.00 | 13.70 | 14.60 | 15.60 |
| 1.50 | 48/0.20 | 7.60 | 8.10 | 9.00 | 10.30 | 10.70 | 10.70 | 11.90 | 13.80 | 14.30 | 15.20 | 16.00 | 17.10 |
| 2.50 | 80/0.20 | 9.00 | 9.60 | 10.50 | 11.70 | 12.70 | 12.70 | 14.10 | 16.60 | 17.20 | 18.10 | 19.30 | 20.30 |
| 4.00 | 56/0.30 | 10.60 | 11.30 | 12.40 | 13.95 | 15.30 | 15.30 | 16.90 | 20.20 | 20.70 | 21.80 | 23.20 | 24.50 |
| * Note insulation thickness, Sheath thickness and overall dimensions given in this table are nominal value. The strand diameter is nominal. However, Construction of the Conductor is designed to satisfy the requirement of conductor resistance as per IS 8130 : 1984 | |||||||||||||
LOAD CELL CABLES
We are designing and manufacturing Load Cell Cables as per the customer’s required. Our manufacturing plant is located in Ahmedabad, India. Load Cell Cables are small cross section cables, available in different sizes to choose from. These cables are ensuring a reliable signal transmission in both electronics and electrical equipment. Incorporated with a special PVC formulation, our load cell cables ensure a long life operation To the end user.
CONSTRUCTION |
|||||||||
| Conductor | 100% electrolytic grade annealed tinned copper flexible conductor | ||||||||
| Insulation | HDPE/PVC insulation | ||||||||
| No. of Cores | 04 Cores / 06 Cores | ||||||||
| Shield | Tinned Copper Shield or Aluminum tape backed by Polyester Tape with ATC drain Wire | ||||||||
| Sheath | 100% Virgin Orange/Grey PVC or TPR for Oil & Chemical Resistant applications | ||||||||
SENSOR CABLES
With the power of doctrine and apprehension our superlative experts manufacture excellent range of Sensor Cables. These cables find its usage in sensors, electronic instruments, actuators and encoders. These cross section cables are operated with the voltage of less than 50V. Conductors of Sensor Cables are made using high grade quality PVC insulation which provides strength & flexibility to it. Available with varying sizes of cross section from 0.14 to 0.5 mm, the cores of cables are also available in different colors in order to easy recognition.
Conductors of the cable consist of fine class wire of high quality. Special PVC formulation is used for insulation to provide high flexibility and strength. Cores are color coded for easy identification. Multicore configuration with or without shielding available. External jacket is of FR PVC orTPR for oil & chemical resistant applications.
CONSTRUCTION |
||||||||||
| Insulation | PVC insulation | |||||||||
| No. of Cores | 3/4/5/6/8 core | |||||||||
| conductor Cross section area | 0.14, 0.25, 0.50, 0.75 | |||||||||
| Shield | Tinned Copper Shielded (optional) | |||||||||
| Sheath | 100% Virgin Orange/Grey PVC or TPR for Oil & Chemical Resistant applications | |||||||||
- High flexible data cable for low-frequency transmission application.
- Protection from external electromagnetic fields ensures excellent data transmission reliability.
- Coverage of copper screen braiding is more than 80%.
- Overall Myler tape wrapping over cores improves the Dielectric strength of the cable.
- Cores are coded with different colors, without color repetition ensures easy identification as per the color coding standard chart.
- All Cores may be coded with different numbers & grey in colors.
- Outer sheath of special based PVC compound.
- Standerd packing : 100 m, 200 m, 500 m
CONDUCTOR: 99.9% pure electrolytic flexible(class 5) bare copper OR Tinned plated copper conductor
INSULATION: FR+HR PVC compound with a high insulation resistance value
OUTER SHEATH: FR+HR PVC compound
SAPERATION: Aluminium mylar tape
BRAIDING: Tinned copper
CABLE STANDERD: IS 694 : 2010 BS 5308 Part : 2, Type: 1 IEC 601156 -1 ( 1994 ), IS 14493 ( Part 1 ) : 1997, IS 5608 ( Part 1 ) : 1991